• 联系人:高经理
  • 手机:13791119938
  • 网址:www.jntchbt.com
  • 地址:济南市天桥区济泺路20号泺口物流港
新闻中心当前位置:首页-新闻中心
    通风管道上材料不达标怎么办?
    来源:www.jntchbt.com 日期:2019-09-30 11:20:27

      在通风管道方面,它是通风空调系统的重要组成部分,在大多数情况下,我们会注意到它实际上是由风管处理设备(即,风管生产线)。然而,由于各种原因,这可能导致通风管道的一系列故障。

      In the aspect of ventilation duct, it is an important part of ventilation and air conditioning system. In most cases, we will notice that it is actually equipped with air duct processing equipment (i.e., air duct production line). However, for various reasons, this may lead to a series of faults in ventilation ducts.

      首先,通风管面对失败,实际上也不是标准的,其处理材料的性能,装饰,因为其表面不均匀,而且,由于它的厚度不均匀,通过这种方式,很明显会有压痕裂纹,然后将砂孔和生锈的疤痕等等一系列的情况,发现管道平面沉,一边将向外凸起,有明显变形现象。

      First of all, the ventilation duct is not standard in face of failure. The performance and decoration of the treatment material are not uniform, because the surface is not uniform, and because of its uneven thickness, there will obviously be indentation cracks in this way. Then, a series of situations, such as sand holes and rust scars, will be found that the pipeline plane sinks, while it will bulge outwards. There are obvious deformation phenomena.

      当通风道上的加工材料不达标时,实际上通风道在运行时会出现漏风现象。此时空调负荷会增加,同时也会影响风管的寿命和性能。

    创新风管.png

      When the material in the ventilation duct is not up to the standard, in fact, the ventilation duct will leak when it is running. At this time, air conditioning load will increase, but also affect the life and performance of air ducts.

      通风管道上的处理材料不达标,其实也是由于其材料不合格,不能满足其作风管等要求。在这方面,它能在很大程度上导致风管的一系列故障。

      The treatment materials on ventilation ducts are not up to the standard. In fact, they are also unqualified and can not meet the requirements of ventilation ducts. In this respect, it can cause a series of duct failures to a large extent.

      在使用风管加工设备制造风管前,应注意检查材料出厂合格证和材料质量合格证。此外,我们还应该注意材料的外观厚度,以确保材料可以使用。

      Before using air duct processing equipment to manufacture air duct, attention should be paid to checking the certificate of material leaving factory and the certificate of material quality. In addition, we should also pay attention to the appearance thickness of the material to ensure that the material can be used.